Description
Our Flesh Hoops a.k.a. “skin hoops” are fabricated from either 3/16″ round, 1/4″ round or 3/16″ square 304 stainless steel, and TiG welded for added strength. They are available in outside diameters from 7″ to 17-7/8″ in 1/8″ increments, and will never rust. Once you have your measurements, round down to the nearest 1/8″.
To determine flesh hoop size, uninstall the current natural skin head, measure the outside diameter and subtract 1/8″ from the measurement. Make sure to bisect the head into two equal parts with the edge of the tape.
For traditional and comfort curve crowns, measure the outside diameter of the raised or rolled ring on the bottom of the crown and add 3/16″ to the measurement.
For moderna crowns, measure the inside diameter and add 11/16″.
Victor Martinez –
Wilfred –
The hoop is good and sturdy, with pretty clean edges and an even surface. The weld is strong, but it protrudes a little bit on mine, which can probably be ground down to level. Please note that I am using the hoop in a rig for stretching and shaping very thin drumskins, as opposed to the final mounting; other customers may have different experiences.
Victor M. –
Buen precio
Ray –
Ryan is an excellent craftsman.
Mike Breunling –
Chris Nettuno –
Steve Kornicks –
Worked perfectly
Victor Martinez –
Simpre. Contento
Aristides Torres –
Darrick Perteet –
Great suggestion to have you do this procedure.Was able to keep the stock heads.
Benny Berckmoes –
Perfect 🤩 ❤️
Kurt –
perfect. clean, stable and precise!
Chris –
James P. –
Thank you. Very professional.
James D. –
I screwed up on the measurements, but the quality of the flesh hoops is superior. I ended up using my old flesh hoops. My next time around I’ll get it right. This was my first time replacing with skins.
Cleophus Naylor –
Victor Martinez –
Nicholas Milia –
Victor Martinez –
Norman Bergeron –
Bob B. –
Anonymous –
Ken Owen –
Steven –
Dominique Noel –
Peter B. –
the flesh hoop fit perfectly, the weld was very well done.
john Trimble –
Bruce G. –